Truma Combi D4E (diesel powered) – with iNet X display – ducting bundle option available

Truma Combi air and water heater with sleek iNet X touch screen display pictured.

Truma Combi D4E has a power output of : 4kW (D4E)

The Truma Combi D4E kit comes with the following items. You will need to supply your own fuel tank connector which is dependant on your campervan make and model.

• Truma Combi Boiler D4E

• Combifrost control John Guest assembly

• Truma iNetX control panel

• 6m control cable

• Duct kit

• Fuel pump bracket

• Wall cowl inner part

• Cowl outer part - Black

• 4m cable for room sensor

• Fuel line 8m x 1.5mm

• Combi Cover plate

• Breather Tube

• Room temperature sensor

• Holding down screws

• Installation & operation instructions

• JG Water Connection elbows

• Combi to diesel wiring harness

• Diesel Pump with hose connectors

• Diesel pump flexible holding bracket

• Exhaust connection clips

• Exhaust O ring

• Exhaust mounting screws

Specification:

• Powered by diesel and easily connected to your vehicle fuel tank

• Can also run on 230V mains electricity

• Optimum warm air distribution via four air outlets

• Heats the vehicle and water very quickly (approx. 15 °C to approx. 60 °C in 20 minutes_

• Air heater can be operated with an empty water tank

• Integrated pressure sensor automatically controls the combustion air infeed

• Comes with exhaust pipes and exterior cowl, water inlet/outlet fittings, drain valve and thermostat sensor

• Lower fuel and power consumption

• Water capacity: 10 litres

• Dimensions (l x w x h) (mm): 510 x 450 x 300

• Weight: 16.8kg (D4E)

Choose our cost-saving bundle which includes the following:

• 10 metres warm air ducting

• 4 x Truma end outlets, to connect to the end points of your ducting

• 4 x Truma back nuts for the end outlets, to secure to your walls/panels

• 4 x Truma elbows

• 8 x Truma pipe clips to secure the ducting run